1. 项目介绍
1. Project Overview

X公司传箔器项目，用于提升IMD车间产能。
Foil Passer Project of X Company for improving capacity of IMD workshop.

3．技术要求
3. Technical Requirements

3.1环境温度范围X—X℃，相对湿度X%时，电气、机械系统等能保持长时间连续正常工作。
3.1 When the ambient temperature range is X~X℃ and the relative humidity is X%, electrical, mechanical and other systems can maintain continuous and proper operation for a long time.

3.2全年工作X天，采用两班制，设备年时基数X小时。
3.2 The equipment shall work X days annually, double shift shall be adopted, and the annual working hours shall be X hours.

3.3设备必须是全新设备，为现有最新成熟技术产品（包括所有零部件、元器件、附件）。
3.3 The equipment shall be brand new and the latest sophisticated technical products (including all the parts, components and accessories) that are currently available.

3.4设备符合使用国家的劳动保护、环境保护、安全防护等相关法规要求。
3.4 The equipment shall comply with requirements of the relevant laws and regulations concerning labor protection, environmental protection and safety protection, etc. of the countries in which such equipment is used.

3.5送模速度要求均匀平稳。
3.5 Mold transport speed shall be uniform and steady.

3.6机体安装尺寸以最终注塑机尺寸为准（附安装简图）。
3.6 Equipment installation dimensions are subject to the final dimensions of the injection molding machine (with installation diagram attached).